Tag Archive for 'Wacker Neuson'

John Deere and Wacker Neuson Enter Into Strategic Supplier Agreement for Compact Excavators

As demand for John Deere construction equipment increases around the globe, the Moline-based manufacturer is entering into a strategic supplier agreement with Wacker Neuson to initially provide compact excavators in China, Southeast Asia, and Oceania. The models will range from 1.7-7.5 tons (1700-7500 kg) and are specifically designed and manufactured for customers in the growing Asia-Pacific marketplace.  The objective of the partnership is long-term collaboration in key growth markets.

“In partnering with Wacker Neuson, John Deere is leveraging the experience and success of their innovative and strongly customer-focused products to help us further develop our position in the Asia-Pacific region,” said David Thorne, senior vice president, sales & marketing, John Deere and Wacker Neuson Enter Into Strategic Supplier Agreement for Compact Excavators. “These excavators are purpose-built to meet the demands of customers, and will be John Deere branded and sold through John Deere dealers.”

While both companies are committed to long-term strategic collaboration, the agreement will run for five years and can be extended in five-year increments. The initial rollout of four compact excavator models will begin in early 2019, and will predominantly be sourced from the new Wacker Neuson factory in Pinghu, China. Service and support of these machines will be offered through the John Deere dealer network.

The Wacker Neuson Group is an international family of companies headquartered in Munich, Germany. As a leading manufacturer of light and compact equipment globally, they have over 50 affiliates and 140 sales and service stations.

Clockwork Concrete Pour – finished on time

Keeping on Course at the US Open

Peeking At CONEXPO

By Greg Sitek

It’s over and now the industry has it sights on 2020 March 7-11 for the next roll of the CONEXPO-CON/AGG experience. The massive construction show will once againtake over LasVegas as it did this year.

Some 2017 CONEXPO show facts:

  • S. buyer attendance jumped over 16 percent from the 2014 show, and total buyer attendance improved by almost 8 percent.
  • Overall contractor and producer attendance grew by 10 percent.
  • Total attendance neared 128,000 for the week.
  • Almost half of all attendees serve in executive positions at their company, and more than 3-in-5 attendees serve in a decision-making role.
  • Almost 26,000 international attendees from 150 countries braved global headwinds including a strong dollar and flagging export markets and composed nearly 20 percent of overall attendance.
  • Attendees purchased a record-breaking 52,000 tickets for education sessions at the show, a 26 percent increase from the 2014 show. Total ticket sales excluding IFPE jumped by over 27 percent compared to 2014.

Without doubt this was one of the most upbeat industry shows I’ve attended. The excitement over the proposed $1 trillion infrastructure bill permeated the show. It was a treat to feel the positive attitude that greeted you every time you sat down for a press conference or entered a booth.

A forward-looking vision for construction and infrastructure took center stage at CONEXPO-CON/AGG and IFPE 2017, from the unveiling of the world’s first 3D-printed excavator and the new Tech Experience to the largest show floor in history and a stellar education lineup featuring leading innovators.

The exhibitions held March 7-11, 2017 at the Las Vegas Convention Center in Las Vegas, Nevada, USA, highlighted the newest product innovations and best practices for the construction and construction materials and fluid power/power transmission/motion control industries.

CONEXPO-CON/AGG and IFPE 2017 spanned a record 2.8 million-plus net square feet of exhibits with a record 2,800-plus exhibitors from the leading U.S. and global manufacturers, from multinational giants to small firms with specialized products.

The technological changes revolutionizing construction and manufacturing were a central feature throughout the show. The first-ever Tech Experience pavilion attracted solid traffic throughout the week, as attendees flocked to see the world’s first-ever 3D-printed excavator, hear from industry innovators during a collection of “Tech Talks,” and engage with the conclusion of the Infrastructure Vision 2050 Challenge Finale, which awarded $100,000 in prize money to winners over a crowd sourced competition to develop forward-looking infrastructure solutions.

There was no shortage of new products and technologies introduced at the show. The following are less than glimpse of only a few but illustrate the kinds of information and products shown this year in Las Vegas. Watch for more. 

JCB previewed an all-new skid steer and compact track loader with a telescopic boom. The JCB Teleskid is a revolutionary new product that can reach 60% further forward than other skid steers and can dig below its chassis to an unparalleled depth of around a little more than 3 feet (one meter).

LiuGong showcased its revolutionary new product – the Vertical Lift Wheel Loader. The product was first unveiled at LiuGong’s global dealer conference in November 2016 and was shown for the first time outside of China at CONEXPO This truly is new technology. The key innovations of the product are the vertical lift loader arms on an articulating frame and the mechanical self-leveling Z-bar bucket linkage on a vertical lift loader.

Wacker Neuson is expanding its telehandler line with the addition of the TH627. The TH627 is the second model in the manufacturer’s line to offer a unique ground-engaging telehandler that is a versatile three-in-one machine concept. Designed with a hydraulic universal attachment plate (SSL), the TH627 can be used with ground-engaging attachments and work like a (1) wheel loader to dig and carry, (2) a skid steer with a compact foot print capable of using multiple attachments and (3) a telehandler with a lift height of 18-feet, 7-inches and 5,500 pounds lifting capacity.

GOMACO Remote Diagnostics (GRD) is proven in the field by GOMACO contractors. GRD is more than telematics, giving owners the visibility of how, when, and where their equipment is being used. It’s a powerful extension to GOMACO’s existing service capabilities. It allows technicians a diagnostic review of a GOMACO machine from corporate headquarters in Ida Grove, Iowa, USA, at the owner’s shop, or on the job site. GRD will transmit G+® settings, configuration and fault history for an immediate and complete diagnosis. GRD also allows software updates, fleet management, service indicators. This remote capability also allows software updates to the G+ for specific applications or unique job-site logistics, such as new radius technology, support for new sensors, new code for 3D machine guidance technology, or additional updates for new product introductions. 

Topcon Positioning Group announces the next generation of automated concrete paving — the ZPS system — with the new Z-Robot and Z-Stack sensor. Using enhanced Topcon Millimeter GPS® technology, the ZPS system is designed to bring unmatched accuracy to concrete paving with a fraction of the hardware required for traditional LPS (local positioning system).

The new Z-Robot is an advanced robotic total station with integrated Z-beam laser technology. The Z-Robot is designed to provide a hybrid function of high-precision, optically-based vertical accuracy control and the convenience of Z-beam laser positioning to maintain that accuracy across the paver. It was shown at the show on a GOMACO paver.

CASE introduced the DL450 a fully integrated compact dozer loader AKA “Project Minotaur” – a first-of-its-kind fully integrated design that matches the best operating characteristics of a compact track loader (CTL) with a crawler dozer. A launch/production date for the machine has not been confirmed, but CONEXPO-CON/AGG 2017 represents a new and advanced phase in product development with extensive voice of customer work being conducted at the show and with top contractors.Project Minotaur” brings together the footprint and performance of a compact track loader with the true power and dozing characteristics of a bulldozer; the new product is currently in “concept” phase.

Remember, this is only a glimpse of what CONEXPO-CON/AGG was…

 

 

 

Schlitz Audubon Nature Center Relies on Equipment for Challenging Conservation Project

Schlitz Audubon Schlitz Audubon2