Faster drilling with more durability – Hilti TE-CX and TE-C Hammer Drill Bits

Hilti takes carbide hammer drill bits to the next level by revolutionizing its best-in-class TE-CX bits.

The new Hilti TE-CX Bit features a gradient carbide head that stops at nothing—not even the hardest rebar.  Incorporating four rugged cutting edges, the carbide head’s special design helps prevent catching or jamming on rebar to extend the life of the bit. The TE-CX bits have been designed for drilling holes for medium to heavy-duty anchors in the 3/16” to 1” range in concrete, masonry and other natural materials.

The new anchor hole suitability indicator means that accurate anchor holes can be drilled when the indicator mark is visible. And, in the unlikely event of breakage, the drill bit will be replaced if the wear mark on the helix is still visible.

However, if you don’t expect to hit rebar, the new Hilti TE-C line offers unparalleled drilling speed.  With a contoured head and carbide blade, the TE-C drill bits are designed to slice through concrete and move dust from the hole to the surface as quickly as possible.

Hilti power tools and accessories, including drill bits, are developed and tested together providing a matched tolerance system.  This means your Hilti combihammers and rotary hammers work even more efficiently and productively when drilling anchor holes and doweling.

For additional information on the Hilti TE-CX and TE-C Hammer Drill Bits, please contact Hilti Customer Service. From the U.S., call Hilti, Inc., at 1-800-879-8000 or visit www.us.hilti.com; from Canada, call Hilti (Canada) Corporation at 1-800-363-4458 or visit www.hilti.ca.

Leave a Reply

Your email address will not be published.

*